BuzzFAQ> > >
Machine HelpFiles> > >
BuzzManual
> > >
BuzzMusic> > >
BuzzMachines> > >
cheapo protection
Function:
Blocks noise bursts.
*NOTE* As this machine is in beta stage I have not implemented stereo
support. Also Avg/RMS detection methods don't work.
-----------------------------------------------------------------------------
Usage:
1. Set the thresholds
2. Play normally
3. When the machine detects a burst it silences the signal and
after a while starts fading the signal in.
You can use in sequence editor to disable machine. (=bypass)
-----------------------------------------------------------------------------
Parameters:
Hold The lenght of time the signal is held totally silent [ticks]
Release The length of the release time of the protection after hold
is over [ticks]
Peak Peak threshold. Detects loud peaks.
Change Change threshold. Detects bursts that have lots of rapid changes.
Average Detects a burst if the average signal strength exceeds the
threshold.
Average Buflen Length of time for the average detection
Average Detects a burst if the RMS value of the signal exceeds the
threshold.
Average Buflen Length of time for the RMS detection.
Attributes:
Min/Max Define the area for the corresponding threshold parameter.
-Min<=threshold<=Max
-----------------------------------------------------------------------------
Revision history:
0.1 Peak/Delta detections work. Mono only.
Mikko Apo
http://www.hut.fi/~mapo/